When your legs are weak or paralyzed and you try to stand or walk, gravity is your enemy. But when you are using a wheelchair or scooter, gravity can become your friend. One of the ways I have maintained my independence despite being unable to stand or walk is by using gravity. I have a wheelchair with an elevating seat. In addition, I have a hospital bed that elevates (the Invacare “full electric” model).
Warning! Rant ahead: Despite the fact that an elevating seat can make it possible for an otherwise immobilized person to independently transfer into and out of bed, on and off the toilet, and on and off a shower seat, Medicare continues to say that an elevating seat or elevating hospital bed is a “convenience” item and they will not pay for it. Fortunately, many manufacturers recognize the need for elevating seats and include them as standard equipment. You will need to find a mobility supplier who knows how to work with you to get what you need.Once you have an elevating seat, you need to make sure that each place that you want to transfer to is of a height that is about half way between the lowest and highest positions of your scooter or wheelchair seat. For example, if you have a wheelchair that is 20 inches high at its lowest seat position and 26 inches high at its highest position, you would be wanting a bed, toilet seat, and shower seat that are about 23 inches high. This would allow you to slide from your elevated chair to the bed and then slide from the bed onto the lowered chair when you are ready. (See the diagrams I provided with this article.)
The other item of equipment you will need is a transfer board. I strongly recommend the “UltraSlick” board. You can buy the 30 inch version over Amazon, or your own mobility supplier may have it in different sizes if that is not convenient. Important: if you are trying to slide on the board when you are not dressed, be sure to wedge a towel part way under so that you can have it between you and the board. Bare skin, especially wet bare skin, on an UltraSlick board will probably stick like glue and you may need help getting free.